22 of 30
23 of 30
Parameters
Alarm – Off | On
Frequency - Daily | Once | Weekends | Weekdays
Choose the days on which the alarm is active.
Note: if you choose 'Once', you are prompted to enter the
required date.
On time – hours and minutes
Source – Buzzer | DAB | FM
If DAB or FM is chosen as the audio source you will also be
prompted to select the Last played station or one of the preset
stations (if set).
Duration – 15 | 30 | 45 | 60 | 90 | 120 minutes
If the alarm is not cancelled M3 returns to standby after this time
period.
Volume – rotate the top control button to set the required alarm
volume 4-16.
This is the volume the alarm will build up to. (Initially the alarm
sounds at a low volume and gradually gets louder to the set
volume).
In all listening modes active alarms are indicated by displaying
the relevant Alarm 1 and/or Alarm 2 icons.
At the set time, the alarm will sound, quietly at first, then gradually
building up to the set volume. When an alarm sounds, the icon in
the display flashes.
To cancel a sounding alarm and switch the radio to standby
Press Standby or Alarm .
5.2 Snooze
To temporarily silence a sounding alarm, press Snooze. You can
change the snooze period by repeatedly pressing Snooze. Snooze
periods are 5, 10, 15 and 30 minutes. The radio returns to standby
for the set time period with a snooze countdown displayed. When
the countdown reaches 0 (zero) the alarm is triggered again.
Press Standby or Alarm to fully cancel a sounding alarm and
switch the radio to standby.
5.3 Sleep
To set the sleep timer while the radio is playing Press Sleep. You
can choose the sleep delay time in minutes from: Sleep Off | 15 |
30 | 45 | 60 | 90.
Use select control button to cycle through the options (or press
Sleep repeatedly) then press Select to choose the displayed
option.
Once you select a sleep delay period, the display returns to the
Now playing screen displaying a Crescent moon icon and the
remaining time, in minutes, before the sleep time expires.
To Next Page
Loading...
Need help?
General
