20 of 30
21 of 30
stereo socket.
3. Press source until the display shows Auxiliary Input.
4. Adjust the volume of M3 (and, if necessary, the audio source
device) as required.
4.4.1 Now playing information
When in Aux In mode, the screen shows Auxiliary Input and the
date.
5 Alarms snooze and sleep
As well as a clock/calendar, there are two versatile wake-up
alarms with snooze facility, and a sleep function to turn the
system off after a set period of time. The alarm sound for each
alarm can use a buzzer or a selection from the audio sources.
To set the clock/calendar
The settings for the internal clock and setting Alarm, Snooze
and Sleep function are all accessible via the Systems Setting
menu.
5.1 Alarms
Note: Alarms will only function when the M3 unit is On or
in Standby mode (Mains power only).
An active alarm is indicated by its icon in the bottom line of the
display.
Note: Alarms can be switched on or off in standby mode (see
below), however, the alarm parameters can only be set when the
M3 is on.
To set alarms
Press Alarm and use the Select control button to select the
required Alarm 1 or 2 and press Select To accept the displayed
alarm settings press Alarm
To exit alarm setting mode, press Menu or Back (alternatively, the
Alarm display will timeout and automatically return to the Now
Playing screen after a short time).
The alarm setup prompts you for the following parameters. Select
a value for each parameter in turn turning the select control button
and press Select to confirm and move on to the next parameter.
To Next Page
Loading...
Need help?
General
