LEMEGA M3 User Manual

26 of 30 27 of 30
sounds are boosted to give a ‘fuller' sound.)
6.3 Time
The time and date can be updated manually or automatically
With auto-update, the time and date are automatically
synchronised with national time signals broadcast over DAB
and FM (when available).
You can also select the display format for the time and date.
The Time menu contains the following options:
Ÿ Set Time/Date – (see below)
Ÿ Auto update - Update from Any | Update from DAB | Update
from FM | No Update
Ÿ Set 12/24 hour - 12 | 24
Ÿ Set date format - dd-mm-yyyy | mm-dd-yyyy.
Set time/date
This option is for manually setting the time and date displayed.
The time displays as hh:mm, with the first value, hh, active
(flashing). Adjust each value using the select control button
and press Select to confirm. The next value then becomes
active and flashes. The date values follow and are set in the
same way.
Note: The date displays as dd-mm-yyyy or mm-dd-yyyy
depending on your choice of date format (see above).
6.4 Backlight
The M3 has a backlight with three brightness settings, and
adjustable timeout (this is the time delay, in seconds, after which
the display switches to the Dim level).
There are three settings:
Ÿ Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec
Ÿ On level - High | Mid | Low
Ÿ Dim level - High | Mid | Low
Note: a green tick indicates the currently selected value for each
setting.
6.5 Inactive Standby
If the M3 is not interacted with for a time(15minutes) it can
automatically enter Standby mode.
6.6 Language
The language used for display messages can be selected from:
English | Français | Deutsch | Italiano
6.7 Factory reset
A factory reset clears all user defined settings, replacing them
with the original default values, so time/date, preferences/settings
DAB station list and preset stations are all lost.
If you select Factory reset, you are asked to confirm by selecting
“Yes”.

LEMEGA M3 Specifications

General

Brand	LEMEGA
Model	M3
Category	Stereo System
Language	English