Lennox MWCB Series Service Manual

41
9.2.3. MHB024S4S-1P
1. Disconnect power to
the system.
2. Remove the one
screw securing
the big handle and
then remove the big
handle.
3. Remove the three
screws securing the
top cover and remove
the top cover.
NOTE: One of the
screws is located
underneath the
big handler.
4. Remove the two
screws securing the
cover plate and then
remove plate.
5. Remove the nine
screws securing
the front cover and
remove the cover.
6. Remove the six
screws securing the
right panel and then
remove panel.

Lennox MWCB Series Specifications

General

Brand	Lennox
Model	MWCB Series
Category	Air Conditioner
Language	English