4. Remove the PCI slot cover.
5. Perform the removal procedure in reverse to reinstall a new FRU.
LED board
Prerequisite
Before you start, read Chapter 1 “Important safety information” on page 1 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See “Power cord” on page 66.
2. Remove the right side cover. See “Left side cover and right side cover” on page 66.
3. Remove the cables from the LED board.
86
Lenovo Legion Tower 5 (26L, 5)Hardware Maintenance Manual
To Next Page
Loading...
Need help?
General