Lenovo ThinkCentre M58p User Manual

Intel MEBx setup and configuration
The following section provides a step by step approach to setting up and
configuring Intel AMT.
Entering MEBx configuration user interface
Press and hold Ctrl+P during POST and select 1 to enter the MEBx of Intel AMT
configuration window. You will be prompted to enter the password.
Changing Intel ME password
Type the default password admin in the prompted field. The default password
must be changed before configuring the MEBx menu.
The new password must meet the strong password criteria defined below:
v Have 8-32 characters in length
v Contain at least one alphabetic character, one numeric character, and one symbol
v Have at least one seven-bit ASCII non-alphanumeric character (!, @, #, $, %, ^,
&, *)
v Contain one upper case letter and one lower case letter
v You can also use the space bar and underscore (_)
Intel ME configuration
Select Intel ME Configuration. A window displays indicating that the system
resets after changing configuration settings.
Press Y. The Intel ME platform configuration window opens. This window allows
you to configure the features of the Intel ME, such as ME state, power control, and
so on. Use the default values for the Intel ME configuration.
10 ThinkCentre M58p with Intel AMT White Paper

Lenovo ThinkCentre M58p Specifications

General

Internal memory	2 GB
Memory clock speed	1066 MHz
Power supply	280 W
Processor cache	6 MB
Processor front side bus	1333 MHz
HDD capacity	250 GB
Number of slots	2
Product type	PC

Weight and Dimensions

Depth	440 mm
Width	175 mm
Height	402 mm