Lenovo ThinkCentre M58p User Manual

Appendix B. Default configuration values for Intel MEBx
This section introduces the default values of configuration settings for the Intel
MEBx.
The following table includes the default configuration settings and values for the
features in the Intel MEBx settings.
Table 4. Reference of default configuration settings and values
Menu Default values Menu Default values
Intel (R) MEBx
default password
admin Set PID and PPS ** Blank
Intel (R) ME State
Control
Enabled Remote Configuration
Enable/Disable **
Enabled
Intel (R) ME
Firmware Local
Update Qualifier
Always Open Manage Certificate
Hashes
VeriSign Class 3
Primary CA-G1
Manageability
Feature Selection
Intel (R) AMT VeriSign Class 3
Primary CA-G3
Intel (R) Quiet
System Technology
Enabled Go Daddy Class 2
CA
Intel (R) ME ON in
Host Sleep States
Desktop: ON in S0,
ME Wake in S3
Comodo AAA CA
Host Name Blank Starfield Class 2 CA
DHCP Enabled Set FQDN Blank
Domain Name Blank Set PKI DNS Suffix Blank
Provision Model Enterprise Unprovision Full Unprovision
Current Provisioning
Mode
Provisioning Mode:
PKI
Username & Password Enabled
Provisioning Record Provision Record is
not present
Serial Over LAN Enabled
Provisioning Server
IP
0.0.0.0 IDE Redirection Enabled
Port number
(0-65535)
0 Password Policy Default password
only
Provisioning Server
FQDN
Blank Secure Firmware
Update
Enabled
Timeout Value 1 Set PRTC Blank
25

Lenovo ThinkCentre M58p Specifications

General

Internal memory	2 GB
Memory clock speed	1066 MHz
Power supply	280 W
Processor cache	6 MB
Processor front side bus	1333 MHz
HDD capacity	250 GB
Number of slots	2
Product type	PC

Weight and Dimensions

Depth	440 mm
Width	175 mm
Height	402 mm