Attaching a docking station to your computer
Attention: When the computer is attached to a docking station, do not pick up the assembly by taking hold
of the computer only. Always hold the whole assembly. Otherwise the docking station might drop down.
To attach the docking station to your computer, do the following:
Note: The ThinkPad Basic Dock does not have the system lock.
1. Disconnect all cables and devices from the computer. Ensure that you turn the system lock key to the
unlocked position (horizontal).
2. Attach your computer to the docking station as shown until you hear a click 1 . Turn the system lock key
to the locked position (vertical)
2 .
3. Check the docking status indicator. If the indicator is off, your computer is not attached to the docking
station successfully. To solve the problem, detach and reattach the computer. If the problem persists,
detach and reattach the ac power adapter of the docking station.
Note: If you attach the computer to the docking station, but do not connect the docking station to ac power,
your computer consumes battery power.
44
T470 User Guide
To Next Page
Loading...
Need help?
General