Detaching a docking station from your computer
Attention: When the computer is attached to a docking station, do not pick up the assembly by taking hold
of the computer only. Always hold the whole assembly. Otherwise the docking station might drop down.
To detach the docking station from your computer, do the following:
Note: The ThinkPad Basic Dock does not have the system lock.
1. Disconnect all cables and devices from the computer and the docking station.
2. Turn the system lock key to the unlocked position (horizontal).
3. Press the eject button to eject the computer 1 , and then grasp both sides of the computer to remove it
2 .
Guidelines on connecting multiple external displays to the docking
station
You can connect multiple external displays to a supported ThinkPad docking station. To ensure that the
multiple displays work correctly, observe the following guidelines and connect the displays to the
appropriate connectors.
• Do not use the connectors as shown in the following illustrations at the same time for connecting multiple
displays. Otherwise, one of the displays as shown will not work.
Chapter 3. Enhancing your computer 45
To Next Page
Loading...
Need help?
General