Chapter 3.Reference information
This section contains monitor specications, instructions to manually install the monitor
driver, troubleshooting information.
Monitorspecications
Table 3-1. Monitor specications for type-model A20270QT0/T27hv-20/62A9-GAR1-WW
Dimensions Depth 208 mm (8.19 in.)
Height 473.6mm (18.65 in.)
Width 613.6 mm (24.16 in.)
Stand Tilt Range: -5
o
~35
o
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size 685 mm (27 in.)
Maximum height 608.6 mm (23.96 in.)
Maximum width 613.6 mm (24.15 in.)
Pixel pitch 0.2331mm (0.01 in.)
Power input Supply voltage
Max supply current
100-240V AC
1.5A
Power consumption
Note: Power
consumption gures
are for the monitor
and the power supply
combined.
Note: Typical power
consumption is tested
under OSD default
setting.
Normal operation <148 W (Max)
<25 W (Typical)
Standby/Suspend <0.5 W
Off <0.3 W at 100VAC and 240VAC
DP Interface DP
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 2560 pixels (max)
Vertical addressability 1440 lines (max)
Clock frequency 300 MHz (max)
HDMI Interface HDMI
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 2560 pixels (max)
Vertical addressability 1440 lines (max)
Clock frequency 300 MHz (max)
3-1 T27hv-20 Flat Panel Monitor User’s Guide