CONTROLS & DISPLAY
Note:
You can also control these functions using
the VeSync app, as well as additional functions
(see page 13).
Power Button
• Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect
it from Wi-Fi® and the
VeSync app (see page 11).
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
• Blinks when there is no
water in the tank. After this
indicator blinks 10 times,
the humidifier will turn o.
Refill the tank and properly
place it on the base to use
your humidifier.
• Lights up when the
water tank is removed.
Remains on until the
tank is replaced.
Mist Level Button
• Press repeatedly to cycle
through mist level settings:
Low, High, and Auto Mode.
(For more details on Auto
Mode, see page 13.)
• Press and hold for
3 seconds to turn o
the humidifier display.
EN
8