• Load envelopes with the flap side up and against the right side of the paper guide.
Notes:
• Do not load or close the multipurpose feeder while a job is printing.
• Load only one size and type of paper at a time.
• Paper should lie
flat
in the multipurpose feeder. Make sure the paper
fits
loosely in the multipurpose
feeder and is not bent or wrinkled.
7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in
the tray.
Loading the manual feeder
The standard 250‑sheet tray has an integrated manual feeder that can be used to print on dierent types of
paper one sheet at a time.
1 Load a sheet of paper into the manual feeder:
• Printable side facedown for one-sided printing
• Printable side faceup for two‑sided (duplex) printing
Note: There are
dierent
ways for loading letterhead depending on the mode of printing.
One‑sided printing using a letterhead Two‑sided printing using a letterhead
ABC
ABC
Loading paper and specialty media 38
To Next Page
Loading...
Need help?
General
