Diagnostic aids 3-19
4512-420, -430
Printer setup
Defaults
Selections are U.S. or Non-U.S. This selection affects the following defaults:
Warning: Changing this setting resets the printer to factory defaults, and data may be lost. It cannot be undone.
Page Count
Reset the page count when an engine card is replaced.
To reset the page count:
1. Select Page Count from the PRINTER SETUP menu.
2. The leftmost number blinks. Use Menu to increase or decrease the number, and press to move to the
next digit to the right. Continue until the correct number displays. To skip a number without changing it,
press .
When is pressed after the last digit, the number is saved.
Perm Page Count (permanent page count)
The permanent page count can only be viewed and cannot be changed.
To view the permanent page count:
1. Select Perm Page Count from PRINTER SETUP.
2. Press Return to return to PRINTER SETUP.
Printer setting U.S. value Non-U.S. value
Default paper size* Letter A4
Envelope size* 10 Envelope DL Envelope
Fax paper size Letter A4
PCL Symbol Set PC-8 PC-850
PPDS code page 437 850
Units of measure Inches Millimeters
* Where input sources do not have size-sensing capabilities.
Page Count
=1234567*