20 ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
Adjusting the angle of the TV to suit view
Adjusting the angle of the TV to suit view
Swivel 20
±
2 degrees to the left or right
and adjust the angle of the TV to suit your view.
(Only 32/42LM6690)
Swivel 10
±
2 degrees to the left or right and
adjust the angle of the TV to suit your view.
(Only 42/47LM6400
、
47/55LM6700)
1
2
Lift and tilt the TV into its upright position
on a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Securing the TV to a table
(Only 32/42LM6690)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.To
secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
NOTE
When adjusting the angle of the product,
watch out for your ngers.
Personal injury may occur if hands or ngers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
(Only42/47LM6400
、
47/55LM6700)
WARNING
To prevent TV from falling over, the TV
should be securely attached to the oor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
10 cm
10 cm
10 cm
10 cm
<Rear> <Front>
10
o
±
2
o
10
o
±
2
o
20
o
±
2
o
20
o
±
2
o
To Next Page
Loading...
Need help?
General
