MAKING CONNECTIONS 23
ENGLISH
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For
more information of external device
’
s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external devices.
•
•
•
•
•
•
•
NOTE
The external device connection may differ from the model.
Connect external devices to the TV regardless of the order of the TV port.
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
Refer to the external equipment
’
s manual for operating instructions.
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the
picture is clear.
In PC mode, some resolution settings may not work properly depending on the graphics card.
Antenna/Cable connection
Connect the TV to a wall antenna socket with an RF
cable (75
Ω
).
NOTE
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal
amplier properly to improve the image quality.
• If the image quality is poor with an antenna
connected, try to realign the antenna in the correct
direction.
• An antenna cable and converter are not supplied.
IN
ANTENNA CABLE
To Next Page
Loading...
Need help?
General
