24
CONNECTIONS & SETUP
CONNECTIONS & SETUP
PC SETUP
GG
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
GG
If the PC does not support Auto DVI, you need to set the output resolution appropriately. To
get the best picture quality, adjust the output resolution of PC graphics card's output resolu-
tion to 1024x768, 60Hz.
When connecting with a D-sub 15 pin cable
Connect the RGB output of the PC to the
RRGGBB IINN
((PPCC//DDTTVV))
jack on the set.
Connect the audio outputs of the PC to the
AAUUDDIIOO
((RRGGBB//DDVVII))
jack on the set.
Turn on the PC and the set.
Select
RRGGBB--PPCC
input source with using the
IINNPPUUTT
button on the remote control.
1
2
3
4
When connecting with a HDMI to DVI cable
Connect the DVI output of the PC to the
HHDDMMII11((DDVVII))((
or
HHDDMMII//DDVVII)) IINN
jack on the set.
Connect the audio outputs of the PC to the
AAUUDDIIOO
((RRGGBB//DDVVII))
jack on the set.
Turn on the PC and the set.
Select
HHDDMMII11//DDVVII ((
or
HHDDMMII//DDVVII))
input source
with using the
IINNPPUUTT
button on the remote control.
1
2
3
4
To Next Page
Loading...
Need help?
General
