55
TVMENU
When NICAM mono is received, you can select NICAM MONO or FM MONO.
When NICAM stereo is received, you can select
NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select
NNIICCAAMM
DUAL I, NICAM DUAL II or
NICAM DUAL I+II or MONO.
NICAM RECEPTION
If the set is equipped with the receiver for NICAM reception, the high quality NICAM
(Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by press-
ing the
II//IIII
button repeatedly.
SPEAKER SOUND OUTPUT SELECTION
In AV1, AV2, S-Video2, AV3, AV4(Option), Component, RGB, HDMI1/DVI or HDMI 2 mode, you
can select output sound for the left and right loudspeakers.
Repeatedly press the
II//IIII
button to select the sound output.
L+R
::
Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R
input is sent to the right loud speaker.
L+L
::
Audio signal from audio L input is sent to left and right loud speakers.
R+R
::
Audio signal from audio R input is sent to left and right loud speakers.
Hotel_0025U 11/26/07 1:33 PM Page 55
To Next Page
Loading...
Need help?
General
