WARNING
WARNING
TO
REDUCE THE
RISK
OF ELECTRIC SHOCK
DO
NOT
REMOVE COVER (OR BACK).
NO
USER
SERVICEABLE
PARTS
INSIDE.
REFER
TO
QUALIFIED
SERVICE
PERSONNEL.
The lightning flash with arrowhead
A symbol, within
an
equilateral triangle,
IA
is
intended
to
alert the user
to
the
presence
of
uninsulated "dangerous
voltage" within
the
product's enclosure
that
may
be
of
sufficient magnitude
to
constitute a risk
of
electric shock
to
persons.
A
The
exclamation
point within
an
equilateral
~
triangle
is
intended
to
alert
the
user
to
the presence
of
important
operating
and maintenance (servicing) instructions
in
the
literature accompanying the appliance.
WARNING
TO
REDUCE THE RISK OF
FIRE
AND
ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS PRODUCT
TO
RAIN OR MOISTURE.
This reminder
is
provided
to
call the CATV system
installer's attention
to
Article
820-40
of
the National
Electric Code (U.s.A.). The code provides guidelines
for
proper
grounding and,
in
particular, specifies
that
the
cable ground shall be connected
to
the grounding system
of
the
building,
as
close
to
the
point
of
the
cable
entry
as
practical.
To
prevent fire
or
shock hazards,
do
not
expose
this
product
to
rain
or
moisture.
Class
Bdigital device
This equipment
has
been tested and found
to
com-
ply with the limits
for
a
Class
B digital device, pur-
suant
to
Part
15
of
the
FCC
Rules.
These limits
are
designed
to
provide reasonable protection against
harmful interference
in
a residential installation. This
equipment generates,
uses
and
can
radiate radio fre-
quency energy and,
if
not
installed and used
in
accor-
dance with the instructions,
may
cause
harmful inter-
ference
to
radio communications.
However,
there
is
no guarantee
that
interference will
not
occur
in
a par-
ticular installation.
If
this equipment does cause
harmful interference
to
radio
or
television reception,
which
can
be
determined by turning the equipment
off
and on, the user
is
encouraged
to
try
to
correct
the interference
by
one
or
more
of
the following
measures:
- Reorient
or
relocate the receiving antenna.
- Increase the separation between the equipment
and
receiver.
- Connect the equipment
to
an
outlet
on a circuit dif-
ferent from that
to
which the receiver
is
connected.
- Consult the dealer
or
an
experienced radio/TV
technician for help.
This device complies with part
15
ofthe
FCC
Rules.
Operation
is
subject
to
the following two conditions:
(1)
This device
may
not
cause
(harmful) interference,
and
(2)
this device must accept any interference
received, including interference
that
may
cause
unde-
sired operation
(of
the device).
Any changes
or
modifications
in
construction
of
this
device which
are
not
expressly approved by the party
responsible
for
compliance could
void
the
user's
authority
to
operate the equipment.
Do
not
attempt
to
modify this product
in
any
way
without written authorization from
LG
Electronics.
Unauthorized modification could void the user's
authority
to
operate this product
;
!
I
A
IMPORTANT
INFORMATION
TO
PREVENT
"IMAGE
BURN
/
BURN-IN"
ON
YOUR
TV
SCREEN
When a fixed image (e.g. logos, screen menus, video game, and computer display)
is
displayed on the TV
for
an
extended period,
it
can
become permanently imprinted on the screen. This phenomenon
is
known
as
"image burn"
or
"burn-in." Image burn
is
not
covered under the manufacturer's warranty.
In
order
to
prevent image burn, avoid displaying a fixed image on
your
TV screen
for
a prolonged period
(2
or
more hours
for
LCD,
1
or
more hours
for
Plasma).
Image burn
can
also occur on
the
letterboxed
areas
of
your
TV
if
you
use
the
4:3
aspect
ratio setting
for
an
extended period.
2
To Next Page
Loading...
Need help?
General
