48
CUSTOMIZING SETTINGS
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select TIME,
then press the OK
ꔉ
button.
3 Use the , , , or button to set up the
desired item, then press the OK
ꔉ
button.
- To return to the previous menu, press the
BACK button.
4 Press the EXIT button when completed.
The available time settings are as follows:
Item Description
Sleep Timer Sets the projector to turn off at a specied time.
Auto Off If there is no signal, the projector automatically turns off after the
preset time has elapsed.
Automatic
Standby
Turns off the projector automatically if there is no input for the given
time.
Presentation
Timer
Time
Alarm
Displays an alarm at the specied time.
* If you set the time to 5 minutes, the time is displayed
on the screen at 1-minute intervals. If you set the time
to 10 minutes or more, the time is displayed at 5-minute
intervals. If the remaining time is less than 5 minutes, it
is displayed at 1-minute intervals.
* You can set the time to 5, 10... 60 minutes in 5-minute
increments.
Time
Keeper
Displays the time remaining until the time specied on
the screen.
* Between 1 and 10 minutes, the time can be set in in-
crements of 1 minute and, between 10 and 60 minutes,
in increments of 5 minutes.
TIME
ꔂ Move ꔉ OK
• Sleep Timer : Off
• Auto Off : 60 min.
• Automatic Standby : Off
• Presentation Timer