49
CUSTOMIZING SETTINGS
OPTION Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
OPTION, then press the OK
ꔉ
button.
3 Use the , , , or button to set up the
desired item, then press the OK
ꔉ
button.
- To return to the previous menu, press the
BACK button.
4 Press the EXIT button when completed.
The available option settings are described below:
Item Description
Language Selects the desired language.
WiDi ID You can check the device's the WiDi ID unique.
Caption Turns subtitles On/Off when Korean is used for the AV input.
Keystone To prevent the screen image from becoming trapezoidal, Keystone
adjusts the top and bottom width of the image if the projector is not set
up at a right angle to the screen.
PJT Mode Turns the projected image upside down or ips it horizontally.
y
Select Rear to project an image onto the back of a transparent
screen (purchased separately).
y
Select Front Ceiling if you installed the projector onto a ceiling.
Blank
Image
Select the background for the blank image. (See 26 page)
Auto
Power
Make the projector turn on automatically when the power cord is con-
nected.
Item
On The projector turns on automatically when the power cord is
connected to the projector.
Off The projector goes into standby mode when the power cord is
connected to the projector.
Auto Input
Search
Turns off the projector automatically if there is no input for the given
time.
High
Altitude
When using the projector at an altitude of 1200 m or higher, set this
option to “On.” Using the projector without changing the High Altitude
option may result in overheating or activation of the projector’s protec-
tion functions. If this happens, turn the projector off and then on again
after waiting several minutes.
OPTION
• Language
• WiDi ID : 0000
• Caption
• Keystone
• PJT Mode : Front
• Blank Image : Blue
• Auto Power : Disabled
• Auto input search : Disabled
ꔂ Move ꔉ OK
To Next Page
Loading...
