56
MAINTENANCE
MAINTENANCE
Clean your projector to keep it in optimal
condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to
clean the lens.
To remove dust or stains, use an air
spray or apply a small amount of clean-
ing agent to a swab or soft cloth and
gently rub the lens.
Make sure that liquid does not ow into
the lens if the product is sprayed directly
onto the lens.
Cleaning the Projector
Case
To clean the projector case, rst unplug
the power cord.
To remove dust or stains, use only a
soft, dry, lint-free cloth.
Do not use alcohol, benzene,
thinners, or other chemicals, as they
may damage the case.
Cleaning the Vents
Dust and foreign material tend to adhere
to the vents.
It is important to use a vacuum cleaner
to periodically remove dust and foreign
material.
Using the projector with excessive dust
around the vents may cause the internal
components to overheat and malfunc-
tion.
Outflow vents
Inflow vents
To Next Page
Loading...
Need help?
General
