42
PROGRAMMING MODE - SETUP MODE
Enter setup mode.
You will see LqC1
Button Display
Press the
Hot
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Display
.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press
Warm
or
Cold
button and then select
or
.
One or the other
will display.
Disable
Enable
Press the
Start
button.
The machine sets up the twin spray, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
11-6. Twin spray setup
Twin spray setup can be used to enable/disable water circulation during tumble. Twin spray pumps
up water in the bottom of the tub to spray on laundry while tumbling.
To Next Page
Loading...
Need help?
General
