23
EXTERNAL EQUIPMENT SETUP
Connecting the HDMI cable
Connect the HDMI output of the DVD to the HDMI/DVI
IN jack on the SET
Select HDMI input source using the INPUT button on
the remote control.
Refer to the DVD player's manual for operating
instructions.
1
2
3
NOTE
►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
!
1
To Next Page
Loading...
Need help?
General
