LG MultiSITE CRC1 Series User Manual

11
User Interface Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONTROLLER OVERVIEW
Setpoint Adjustment
Setpoints can be modied in three di󰀨erent ways when in Auto Mode; Cooling Setpoint change, Heating Setpoint change or
Cooling/Heating Setpoint change.
09-26-2017
2:43 PM
Occ Auto Cool
74°
75.0
Cooling Setpoint °F
Humidity
45 %
2:43 PM
Occ Auto Heat
74°
75.0
Heating Setpoint °F
09-26-2017
Humidity
45 %
09-26-2017
2:43 PM
Occ Auto Heat
74°
Indoor °F
Humidity
66 %
Auto
78
68
Cooling mode or cooling only
sequence of operation
In Cooling mode, the setpoint displayed in the bar is the cur-
rent occupied cooling setpoint.
During occupied setpoint adjustment, the large digits are tem-
porarily used to display the occupied cooling setpoint while it
is adjusted.
Normal temperature display resumes after the setpoint is
adjusted and the actual occupied cooling setpoint is displayed
in the setpoint bar.
Heating mode or heating only
sequence of operation
In Heating mode, the setpoint displayed in the bar is the cur-
rent occupied heating setpoint.
During occupied setpoint adjustment, the large digits are tem-
porarily used to display the occupied heating setpoint.
Normal temperature display resumes after the setpoint is
adjusted and the actual occupied heating setpoint is displayed
in the setpoint bar.
Automatic Heating / Cooling mode
In automatic mode, the setpoint displayed at the top of
the set point bar represents the actual occupied cooling
setpoint.
During occupied setpoints adjustment, the large digits are
temporarily used to display the occupied “Cooling Set-
point” or occupied “Heating Setpoint”. The actual setpoint
is dependent on the last effective demand (heating or
cooling).
Normal temperature display resumes after the setpoints
are adjusted and the actual occupied heating and cooling
setpoints are displayed in the setpoint bar.

LG MultiSITE CRC1 Series Specifications

General

Brand	LG
Model	MultiSITE CRC1 Series
Category	Remote Control
Language	English