LG MultiSITE CRC1 Series User Manual

12
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONTROLLER OVERVIEW
1/3 Zigbee Configuration
Zigbee channel
Zigbee PAN ID
COM address
15
11
254
Zigbee short
0x0000
Node type
Zigbee status
No NWK
Coord.
Using the Controller Configuration Screens
Some of the buttons on the Home screen display conguration screens. Controller operating parame-
ters can be set as necessary for your system. The gure below describes how to use the conguration
screens.
Controls
The left side of the
screen lists controls and
monitored parameters.
Control Values
The right side of the
screen is a button you
can tap to change the
value of the control or
parameter displayed to
its left.
Read Only
Dark gray buttons are
read only. These values
can’t be changed by the
user.
Back Button
Tapping this button
goes back one level in
the screen hierarchy.
Left/Right Arrows
The left and right
arrows move between
screens on the same
level as the currently-
displayed screen.
Up/Down Arrows
The up and down
arrows are used to
change the value of
the active (highlighted)
control.
Screen Name

LG MultiSITE CRC1 Series Specifications

General

Brand	LG
Model	MultiSITE CRC1 Series
Category	Remote Control
Language	English