8
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONTROLLER OVERVIEW
Home Screen
Note:
Available functions/features may differ based on the connected system.
When any change is made to a parameter, the value is automatically saved in memory when the next
parameter is selected or another page is opened.
Arrows auto-increment/decrement at higher speed when holding button for more than 2.5 seconds.
09-26-2017
2:43 PM
Occ Auto Heat
74°
78
Indoor °F
Humidity
66 %
68
Auto
Locked by central controller
Occupancy Status
Occupied (Occ) or
Unoccupied (Unocc)
Operation Mode Status
Current Fan Speed Setting
Up Arrow
Raise Temperature Setpoint
Room Indoor
Temperature
Down Arrow
Lower Temperature Setpoint
On/O
Turn the display
on or o
Schedule
Set weekly
schedule
More
Provides end user with
access to less often used
functions.
Fan Speed
Set fan to Slow, Low, Low-Med,
Medium, Med-High, High, Power,
Auto. (Available options depend
on IDU model.)
Operation Mode
Set Cool, Heat, Auto
Cool, Auto Heat,
Fan, Dry modes
Note: Pressing and holding the
Operation Mode icon takes the user
to the Operation Mode page.
Short Network Message
Note: Long-press of the Fan
Speed button when in cooling
mode triggers Power Cooling
mode. If in Power Cooling mode,
last airow segment on top is lit
in purple and the text changes
from “Fan” to “Power Cool”. This
mode lasts for 30 minutes and
then reverts back to the previous
fan speed.
Auto
The controller home screen is shown and described below.
Current Time
Room Indoor
Humidity
Current Date
To Next Page
Loading...
Need help?
General
