Appendix53
Controlling a TV with
the Supplied Remote
Control
You can control yourTV using the buttons below.
By pressing
(.]) (TVPOWER)
AVIINPUT
VOL +/-
You can
Turn the TV on or off.
Switch the TV's input source
between the TV and other
input sources.
Adjust the volume of the TV
PR/CH A/V Scan up or down through
memorized channels.
.- @ Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
\__
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
Efyour TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down (.]) (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons see the table below).
I
Manufacturer Code number
LG 1(Default), 2
Zenith 1,3, 4
GoldStar 1,2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the (.]) (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
