54 Appendix
/
>
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the unit will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the unit.
2. Use </> to select a desired option and then
press ENTER (®).
[OK]
[Cancel]
Starts the software
update.
Exits the update menu and the
home menu appears.
Option 2:
if the software update is available from the update
server, the "Update"icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
Software update
You can update the unit using the latest software
to enhance the products operation and/or add
new features.You can update the software by
connecting the unit directly to the software update
server.
.- @ Note
• Before updating the software in your unit,
remove USB Device from the unit.
• Before updating the software in your unit,
turn the unit offand then turn it back on.
• During the software update procedure,
do not turn off the unit or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power
and turn it on for stable performance.
• This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 17).
2. Select [Software] option in the [Settings] menu
then press ENTER (®).
3. Select [Update] option, and press ENTER (®).
The unit will check for the newest update.
_-@ NoSe
• PressingENTER(®) while checking for the
update wiJ]end the process.
• If there is no update available,the Message,
"No update is found"appears. PressENTER
(®) to return to the [Home Menu].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
