11. Appendix UMX-TPS-TX100 series – User's Manual 178
Release Notes of the Firmware Packages
v1.5.0b4
Release date: 2021-05-17
New feature:
▪
▪ Added AND operator for Event Manager Conditions (Advanced Control pack v3)
▪ Added Condition triggering for Event Manager (Advanced Control pack v3) for UMX-TPS-TX140-Plus
and UMX-TPS-TX140K only!
▪ Added Condition detect on property change to anything in Event Manager (Advanced Control pack v3)
▪
UMX-TPS-TX140K only!
▪
clients (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-TPS-TX140K only!
▪
TX140-Plus and UMX-TPS-TX140K only!
▪
header, body) (Advanced Control pack v3) for UMX-TPS-TX140-Plus and UMX-TPS-TX140K only!
▪
▪ Added cleartext login function (disabled by default) (Advanced Control pack v3) for UMX-TPS-TX140-
Plus and UMX-TPS-TX140K only!
▪
only!
▪
TPS-TX140K only!
▪ Added Macro capability (running partial device preset with tags) (Advanced Control pack v3) for UMX-
TPS-TX140-Plus and UMX-TPS-TX140K only!
▪ Added new method for CEC control button sendClick (Advanced Control pack v3) for UMX-TPS-TX140-
Plus and UMX-TPS-TX140K only!
▪
▪
▪
▪
▪ Added Network HostName property (default: lightware-<serialnum>).
▪ Added new ConnectedSource property for media output nodes.
▪
step before actually starting the device update.
v1.4.0b8
Release date: 2019-07-23
New feature:
▪
▪ Added support for FP-UMX-TPS-TX120-GES, FP-UMX-TPS-TX130-GES product variants.
▪ New bootloader is used, which allows the connected TPS-RX95's to be updated remotely.
▪
▪
▪ The method of storing device settings in EEPROM is updated, which may result in losing all the
▪
and the user interface shows if any of the conditions are met.
▪
trigger multiple actions at the same time, inverse condition can be used.
▪
▪
signal, and the received IR frames are also sent to this TCP connection.
▪
▪ EDID node properties changed: PreferredResolution, MonitorName and AudioInfo properties are added
▪ The device is able to identify IR commands on either the local or link IR input port. This feature can be
connected to Event Manager, which means, that the device can be programmed to do various actions,
▪ TCP and UDP messages can be sent by the device to control projectors and any other devices. This
feature can also be used with Event Manager.
▪ Audio and video port names are changed: 'I' is used for inputs and 'O' is used for outputs, instead of 'P'.
▪ New EDID driver is used, the content of some factory EDID's are changed according to EDID 1.3 and
1.4 standard.
▪
▪ Firmware platform library updated
▪ Sending IR codes (SendProntoHex e.g. send max. 200 Byte IR code with Event Actions) for UMX-TPS-
TX140-Plus only!
▪ Added 'Disable default button function' option to support button customization in Event Manager
▪
▪
To Next Page
Loading...
Need help?
General
