D9U001GE4-0101_0570
15.2 Installation of Active Mattress
WARNING!
Follow instructions for use of a compatible active mattress carefully!
CAUTION!
Risk of material damage due to an incorrect xation of compatible active mattress on the mattress support
platform!
► Adjust the bed to maximum Cardiac Chair Position before xing all the straps of the inated mattress to the
mattress support platform!
Installation instructions:
► Remove any existing mattress.
► Observe mattress dimensions and its orientation before putting it on the Mattress support platform.
► Place SCU on the foot board of the bed or on the oor.
15.2.1 Straps with side release buckles
To x mattress on the Mattress Support Platform:
► Inate the mattress intended to be xed on the mattress support platform.
► Adjust the bed to the maximum Cardiac Chair Position.
► Run four straps through the four corresponding holes in the covers of Mattress Support Platform and two straps through
the accessory holders under the calfrest cover.
► Lock all the side release buckles by connecting their male and female parts together.
To remove mattress from the Mattress Support Platform:
► Release all the buckles by pressing them from both sides and by disconnecting their male and female parts.
► Pull all the straps out of the Mattress Support Platform.
► Remove mattress from the Mattress Support Platform.
Fig. Fixation of the passive mattress with straps on the mattress support platform of Eleganza 4 bed
To Next Page
Loading...
Need help?
General
