D9U001GE4-0101_05
83
19 Maintenance
WARNING!
Risk of injury when working on the bed!
► Ensure that the bed is disconnected from the mains connection prior to assembly, disassembly and maintenance.
► Ensure that the castors are locked prior to assembly, disassembly and maintenance.
WARNING!
Risk of injury due to defective bed!
► Have a defective bed repaired immediately.
► If the defect cannot be repaired, do not use the bed.
CAUTION!
Material damage due to incorrect maintenance!
► Remove a defective bed from service and have the defective bed repaired.
NOTE LINET ® recommends attaching the maintenance plaque to the bed.
To keep the bed functioning correctly, ensure that the following maintenance work is performed at the correct intervals.
19.1 Monthly maintenance performed by the user
► Check all movable parts for wear.
19.2 Maintenance every 3 months performed by the user
► Check function of brake lever.
► Clean the piston shafts and lubricate with silicone oil.
► Clean the bolts and hinges of the mattress support platform (backrest, thighrest, calfrest) and lubricate with silicone oil.
► Check mechanism of mattress support platform extension.
► Check bolts on castors and tighten them if necessary.
19.3 Maintenance every 12 months performed by the service department
of the manufacturer
19.3.1 Spare Parts
The product label is located on the inside of the longitudinal rail of the mattress support platform frame. The product label contains
information for claims and ordering replacement parts.
Information about spare parts is available from:
■ Customer service
■ Sales
■ Our technical support department
19.3.2 Completeness
► Perform a visual check (with delivery note if necessary).
► Have any missing parts replaced.
19.3.3 Wear
► Check all bolts and tighten if necessary.
► Check all locking mechanisms.
► Check the bed for wear, scratches or rub marks.
Eliminate the cause if necessary.
► Have any defective parts replaced.
19.3.4 Functioning
► Check that all bed adjustments reach the maximum position.
► If necessary, clean, lubricate or replace any worn spots and parts.
To Next Page
Loading...
Need help?
General
