EasyManuals Logo
Home>Linksys>Wireless Access Point>LAPAC1750

Linksys LAPAC1750 User Manual

Linksys LAPAC1750
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
webserver (IIS)
RADIUS Server (Internet Authentication Service)
Certificate Authority
Windows 2000 Domain Controller Setup
1.
Run dcpromo.exe from the command prompt.
2.
Follow all of the default prompts, ensure that DNS is installed and enabled during
installation.
Services Installation
1.
Select the Control Panel > Add/Remove Programs.
2.
Click Add/Remove Windows Components from the left side.
3.
Ensure that the following components are selected.
Certificate ServicesAfter enabling this, you will see a warning that the computer
cannot be renamed and joined after installing certificate services. Select Yes to
select certificate services and continue
World Wide Web ServerSelect World Wide Web Server on the Internet
Information Services (IIS) component.
From the Networking Services category, select Dynamic Host Configuration
Protocol (DHCP), and Internet Authentication Service (DNS should already be
selected and installed).
4.
Click Next.
5.
Select Enterprise root CA, and click Next.
107

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LAPAC1750 and is the answer not in the manual?

Linksys LAPAC1750 Specifications

General IconGeneral
Modulation-
Frequency band2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity11 channels
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3at, IEEE 802.3u
Wi-Fi data rate (max)500 Mbit/s
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Quality of Service (QoS) supportYes
InternalNo
PlacementCeiling, Wall
CertificationFCC, CE, IC
Product colorWhite
Cable lock slot typeKensington
Supported network protocolsIPv6
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Security algorithms802.1x RADIUS, WDS, WEP, WPA, WPA2
Number of SSID supported16
Antenna featuresIntegrated antenna
Input current1.5 A
AC input voltage12 V
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth243.08 mm
Width236.98 mm
Height43.69 mm

Related product manuals