Lippert Components Happijac User Manual

Rev: 07.10.19 Page 5
CCD-0001575
Fig. 4
Fig. 3
Brackets
The HappiJac Bedlift system comes installed with screw-in tab brackets (Fig. 3) affixed to the upper trolleys. The
lower trolleys can be fitted with hooked tab brackets (Fig. 4) for a lower bed platform, or hooked brackets with
moveable arms (Fig. 5) that can accomodate a sofa/dinette configuration.
Fig. 6
Limit Switches
Upper and lower limit switches (Fig. 6A) are located behind the C-channel and secured by two small screws
(Fig. 5B). The limit switches are used to stop the bed(s) at their maximum travel range. However, the bed(s)
can be stopped and used at any desired height. After the control switch is released, the electric brake is set
— securing the bed(s) in the current position.
B
A
Fig. 5

Lippert Components Happijac Specifications

General

Brand	Lippert Components
Model	Happijac
Category	Lifting Systems
Language	English