Rev: 07.10.19 Page 7
CCD-0001575
A
B
Fig. 8
Operating Precautions
• CHECK to make sure the attaching pins are securely fastened to all four corners of the bed platform before
towing the trailer, or using the bed(s).
• ALWAYS raise the bed(s) to the full up position when the trailer is being towed to avoid damage to the bed
lift system as a result of bouncing.
• ALWAYS make sure that the areas above, below and adjacent to the bed(s) are free from obstructions
before operating the bed(s).
• ALWAYS check before operating bed(s) to ensure that there is nothing interfering with the travel of the
chain mechanism inside the c-channel.
• ALWAYS use care when loading cargo/vehicles in the bed area. This is to avoid damage to the bed
mechanism.
• ALWAYS properly secure loads in the bed area to avoid damage to the bed mechanism from shifting or
falling loads.
• NEVER operate the bed(s) with any items other than bedding on the bed platform(s).
• NEVER travel with any items other than bedding on the bed(s). Loose items can become projectiles.
• NEVER operate the bed(s) when persons or pets are on the bed platform.
• NEVER hang from, or hang more than 20 pounds, on the cross-connecting shaft.
Operation
Control Switch
NOTE: Upper and lower trolleys move together, unless one trolley set has been locked into place.
The the upper and lower trolleys are operated from the control switch (Fig 8). Pressing and holding the
switch in the UP position (Fig. 7A) moves the trolleys upward. Pressing and holding the switch in the DOWN
position (Fig. 7B) moves the trolleys downward.
To Next Page
Loading...
Need help?
General
