Lippert Components Happijac User Manual

Rev: 07.10.19 Page 6
CCD-0001575
Bunk Stop Settings
The upper bunk trolley is free-floating and is carried by the lower trolley. The height at which this trolley
stops is set by "stop blocks" which sit inside the trolley rails. To change this stop, remove the two screws
holding the bed in place, and move it to the desired height (Fig. 7). Repeat for all four corners.
Fig. 7
Stop
Block

Lippert Components Happijac Specifications

General

Brand	Lippert Components
Model	Happijac
Category	Lifting Systems
Language	English