Connecting a Coaxial Audio Receiver Using an Audio Cable
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable (not included) to connect the
TV’s DIGITAL AUDIO OUT (COAXIAL) output socket
to an external audio receiver’s audio coaxial input
socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
which is located at the front right side under the
frame.
3. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
4. Press the SOURCE button on the front right side
panel of the TV or the INPUT button on the remote
control to display the Source List. Use the
buttons
to select any desired input source and then press the
OK button to confirm.
The TV’s volume control will have no
effect. You may control the audio level via
the Audio Receiver.
Rear Right Side View of TV
DIGITAL
AUDIO OUT
（ COAXIAL）
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
Audio Cable
(not included)
Audio Receiver
L32HED12_IB_Running Change_120613_Annie.indd 16 12年6月13日 下午6:59
To Next Page
Loading...
Need help?
General
