EasyManuals Logo
Home>Logik>TV>L32HED12

Logik L32HED12 User Manual

Logik L32HED12
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
GB
Initial Setup
6. Press the buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country Select the country where you will operate the TV.
The default country is set as UK.
Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable (not
included) to the aerial socket on the wall and the
other end of the cable to the RF (75Ω) socket at the
rear right bottom view of your TV.
Do not connect the TV to the mains
supply until you have completed all the
connections.
HDMI1 IN
HDMI2 IN
PC IN
RF coaxial cable
(not included)
OR
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. Switch on the POWER ON/OFF switch which is
located at the front right side under the frame. At this
stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
4. In standby mode, press the
/ I button on the
front right side panel of the TV or the
button on
the remote control to turn the TV on. The red LED
indicator will turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
/ I button on the front right side panel of the TV or the button on the remote control is only used for
switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the
mains power, please remove the mains plug from the mains socket or switch off the POWER ON/OFF switch.
To the mains
socket
5. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please go to the section Selecting the Input Source on the next
page.)
Please select an OSD Language
Deutsch
Español Français
Português Italiano
English
Please ensure aerial is plugged in!!
Then press OK button to start
Country
France
Germany Portugal
Italy Spain
UK
Menu
L32HED12_IB_Running Change_120613_Annie.indd 17 12年6月13日 下午6:59

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L32HED12 and is the answer not in the manual?

Logik L32HED12 Specifications

General IconGeneral
BrandLogik
ModelL32HED12
CategoryTV
LanguageEnglish

Related product manuals