Logik L37DIGB10 User Manual

GB
14
Connections
Connecting an AV Device with Component (YPbPr) Cable
1. Use a component cable to connect the TV’s YPbPr
input sockets to an external AV device’s component
output sockets.
2. Use an AV cable to connect the TV’s AUDIO(L/R) input
sockets to the external AV device’s audio output
sockets. (Audio Left = white, and Audio Right = red)
Component port on the TV Y Pb Pr
Video output ports on DVD
player
Y Pb Pr
Y Cb Cr
3. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch at
the back of the TV.
4. Press the
button at the front of the TV or on the
remote control to turn on your TV.
5. Press the SOURCE button to display the Source List.
Use the
buttons to select YPBPR and then press
the OK button to confirm.
Connecting a Computer with VGA Cable
1. Use a VGA cable to connect the TV’s VGA input
socket to a computer’s VGA output socket. Use an
audio cable to connect the TV’s PC AUDIO input
socket to the computer’s audio output socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch at
the back of the TV.
3. Press the
button at the front of the TV or on the
remote control to turn on your TV.
4. Press the SOURCE button to display the Source List.
Use the
buttons to select PC and then press the
OK button to confirm.
VGA Cable
(not included)
Audio Cable
(not included)
Rear View of TV
DVR USB HDMI1 HDMI2
SCART 1 SCART 2
S-VIDEO
ON
OFF
Computer
DVR USB HDMI1 HDMI2
SCART 1 SCART 2
S-VIDEO
ON
OFF
AV Cable
(not included)
Rear View of TV
Component Cable
(not included)
L
R
COMPONENT
OUT
Y
Pr
Pb
Pb/Cb
Pb/Cb
Pr/Cr
Pr/Cr
Y
Y
Satellite Receiver
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
Yellow (Video)
Red (R)
White (L)
Yellow (Video)
Red (R)
White (L)
• The best resolution is 1024 * 768.
• If your computer is set to shut down after a
few minutes of idle mode, the TV will also
switch to standby due to no signal being
received, this is to save energy. Press the
button at the front of the TV or on the
remote control to restart the TV.
L37DIGB10_IB_L37DIGB10_IB_110131_Annie.indd 14 11年1月31日 上午10:54

Logik L37DIGB10 Specifications

General

Brand	Logik
Model	L37DIGB10
Category	LCD TV
Language	English