Logik L37DIGB10 User Manual

25
GB
Using the Features
3. Press the buttons to change the following settings.
Current
Channel
To select a channel number for a particular frequency through manual tuning.
Search Press the OK button or the
button to perform manual search for
analogue TV programmes.
Press the
buttons to start the backward / forward searching for
the channel frequency. The searching will stop automatically once a
channel is found.
Press the MENU button to return to the previous menu.
Fine Tune Press the OK button or the button to fine tune the channel.
Press and hold the
buttons to increase / decrease the channel
frequency.
Alternative
Press the 0-9 buttons to enter your desired channel frequency
directly and then press the OK button to confirm.
Press the MENU button to return to the previous menu.
AFC (Automatic
Frequency
Control)
To fine tune the channel automatically when the signal is weak.
Colour System To select TV colour system between: AUTO / PAL / SECAM. (not available for I sound system)
Sound System To select TV sound system between BG, DK, I and L/L. (for AUTO & SECAM system only)
4. Press the MENU button to save the settings and return back to the previous
menu or the EXIT button to exit the menu.
Manual Search (DTV Mode)
Allows you to make manual fine tuning adjustments if the channel reception is poor under DTV mode.
1. Press the MENU button and then use the
buttons to select the Channel
menu and then press the OK button or the
button.
2. Press the
buttons to select Manual Search and then press the OK
button or the
button.
3. Press the buttons to select Channel. Press the button to select Start
and then press the OK button to start the search.
4. Press the MENU button to save the settings and return back to the previous
menu or the EXIT button to exit the menu.
L37DIGB10_IB_L37DIGB10_IB_110131_Annie.indd 25 11年1月31日 上午10:54

Logik L37DIGB10 Specifications

General

Brand	Logik
Model	L37DIGB10
Category	LCD TV
Language	English