Logik LBMFMX15 User Manual

11
4. At the completion of the set duration, the timer will stop the oven and give an audible
warning. Also, the symbol ”A” will begin to ash on the screen. After bringing the cooking
function and oven temperature knob to “0” position, press any button for less than 3 seconds
to stop the warning tone.
Full-automatic programming
This function is used to cook after a certain period of time, with a certain duration. The food to
be cooked is put into the oven. The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
1. Press “
“ button until you see Dur on the timer screen. Use +/– button to adjust cooking
period. Press “ “ button to conrm. The day’s time will show on the screen and the symbol
“A” will begin to continuously light on the screen.
2. Press “
“ button until you see End on the timer screen. Use +/– button to adjust nishing
period. Press “ “ button to conrm. The day’s time will show on the screen and the symbol
“A” will begin to continuously light on the screen. The symbol “ ” disappears until the time
for cooking starts.
After setting the Dur time and End time, the oven will start operating at the time calculated by
deducting the cooking period (Dur time) from the set nishing time (End time), and will stop at
the set nishing time. (e.g. If the End time is set at 17:30 and Dur time is set to 1 hour 30 minutes,
the oven will start operating at 16:00).
The timer will give an audible warning and the symbol “A” will begin to ash. After bringing the
cooking function and oven temperature to ”0” position, press any button for less than 3 seconds
to stop the warning tone.
Press and hold “
“ button for more than 3 seconds to set the oven to Manual mode again to use
the oven.
Once setting to full-automatic mode, all the time cannot be changed. Changing time
means cancelling the automatic programme and entering into another mode. If you
need to reset to automatic mode, you need to stop setting the current mode, and set the
automatic mode according to the above steps again.
• Press and hold +/– for more than 3 seconds. The date will progressively and rapidly
increase or decrease.
• When setting each of the time function programme, if there is no operation for 5
minutes, the unit will enter manual mode.
• When setting each of the time function programme, press and hold ”
“ button for more
than 3 seconds to cancel the current setting. Then the unit will enter manual mode.
• During time function setting, press + and ”
“ for more than 3 seconds, a beep tone will
sound and you can cancel the current time function setting. The unit will then enter
standby mode.
LBMFMX15_IB_RC_160920_grace.indd 11 20/9/16 5:53 pm

Logik LBMFMX15 Specifications

General

Brand	Logik
Model	LBMFMX15
Category	Oven
Language	English