18
Electrical Connection
Fitting Guidelines
The oven is manufactured to work with single-phase
alternating current (220V – 240V/50Hz). The connection
diagram is also found next to the cover of the connection
box.
• All electrical work should be carried
out by a suitably qualied and
authorised electrician.
• No alterations or wilful changes in the
electricity supply should be carried
out.
• Voltage of heating elements 220V –
240V.
• This product must be earthed.
• For this connection a power with a
minimum specication of H05VV-F
(PVC insulated and sheathed) 3 x
4mm
2
should be used.
This appliance must be earthed.
For this connection, ‘Twin and Earth
6242Y’ type cable can be used.
LBMFMX15_IB_RC_160920_grace.indd 18 20/9/16 5:53 pm
To Next Page
Loading...
Need help?
General
