9
Connecting to the Mains
When you rst connect the oven to the mains supply, the unit display will show “12.30“. Set the
time rst before use (Follow step 2 - 5 in Setting the time section below).
Setting the time
1. Press and hold + and – buttons at the same time for 3 seconds until the display ashes.
2. Press +/– button to adjust the hour setting.
3. Press
button to conrm hour setting.
4. Press +/– button to adjust the minute setting.
5. Press
button to conrm the minute setting and the timer will be in standby mode.
If the display does not ash, adjust the time of day by pressing the ”+”
and”-” buttons at the same time for more than 3 seconds.
Oven On and O
If the timer is in standby mode, press button for more than 3 seconds, the timer will enter
manual mode and the “ ” will light up continuously.
1. Set the desired cooking function and the temperature degree.
2. Set the time function, then the oven will on.
• If you set Dur or End, after cooking, the oven will automatically turn o.
• If you set manual or minute minder, after cooking, bring the cooking function and oven
temperature knob to “0” position. Press ”
“ and “+” buttons for more than 3 seconds to return
to standby mode.
It is recommended to run the oven for 15 minutes at 200 degrees to burn o any residues
from their surfaces.
LBMFMX15_IB_RC_160920_grace.indd 9 20/9/16 5:53 pm