10
• Set the radio to DAB mode.
The radio will tune to the last station played.
The station name and scrolling information text will be displayed.
Listening to DAB Radio
Browsing Stations
• Press } or { to browse up or down the station list for the station you want. When you
nd a station that you want to listen to press the SELECT/SNOOZE button.
Secondary Services
A > symbol after the name of a station indicates there are secondary services available for
that station. These secondary services are related to the primary station, e.g. a sports station
may want to add extra commentaries.
The secondary services are inserted directly after the primary station in the station list.
• To select a secondary station, browse to the secondary service you want, then press
SELECT/SNOOZE to select it.
A > symbol is displayed before the station name if a station is a secondary service.
If the secondary service ends, the unit will automatically switch back to the primary station.
A Full Scan will scan the whole of the DAB band and nd all the DAB stations in your area.
You can also perform a Full Scan to scan for new DAB stations if you have moved your radio.
The stations will be added to your station list.
• While listening to DAB radio, press SCAN to start a Full Scan.
The scan will take a few minutes. While the scan is running, the scan progress will be shown and
the number of stations found will be displayed.
DAB Scanning
When the scan nishes, the radio will play the rst station in the sequence.
Number of
stations found
Scan progress
If no stations are found, switch the radio o and move it to a location with a stronger
signal. When you switch the radio back on it will automatically repeat the scan process.
LDABXRW13_IB_V6.indd 10 26/06/2014 17:29
To Next Page
Loading...
Need help?
General
