Mechanical
Differential
lock pedal
(10) Differential lock pedal
If the tractor cannot go forward as one side rear
wheels are slipping, press the differential lock
pedal down.
Differential lock is effective for working on
slippery ground, and working with a plough
If engaged, both rear wheels will rotate at equal
speed. So, It disturbs steering operation and you
cannot turn.
Take your foot off the pedal to release the
differential lock. If the traction is equalized, the
lock is released automatically.
If the differential lock does not disengaged, i.e. if
turning to right or left in a wide radius, depress
the clutch pedal once and press one side brake
pedal slightly for a second, and then the other.
Regarding the function of the differential lock
pedal, HST type is identical with the mechanical
one except that each pedal is located at both
different sides of platform.
▶
Do not turn the tractor while the differential lock is engaged.
▶
Do not use the differential lock while driving on the road.
▶
Stop or slow the tractor before engaging the differential lock.
Warning
(11) HST forward / reverse pedal
Differential
lock pedal
3
3 3
3 - 13
(11) HST forward / reverse pedal
(HST type)
Press the HST forward pedal slowly in order to
move forward and if release the pedal, it returns
back to the neutral position and tractor stops.
The HST reverse pedal is as same as the HST
forward pedal operation.
warning
▶
Press the brake pedal to prevent stopping distance from being extended when
driving in high speed .
▶
DO NOT operate the pedal hastily. It may cause a shock to you.
HST
reverse
pedal
HST
forward
pedal
To Next Page
Loading...
Need help?
General
