(6) Parking
Stop the tractor on a level surface, not on a slope.
Disengage PTO and place all the transmission
shift lever in NEUTRAL position and apply the
parking brake.
Stop engine and remove ignition key.
Before you leave the operator’s station, wait for
engine and all moving parts to stop.
▶
If it is necessary to park the tractor on a slope, furthermore with loaded trailer, the
tractor may roll down, even though the parking brake is applied. In this case, apply
- Mechanical : downward slope
⇒
reverse 1 gear / upward slope
⇒
forward 1 gear.
- HST Type : place the range gear shift lever to the lowest speed.