①
①①
① Hitch
Vertical load : 900kg (1984 lbs)
Hitch
Snap pin
Hitch pin
(8) Hitch and Drawbar (optional)
When attaching towing equipments, use the hitch
or drawbar. DO NOT use the 3-point linkage or
other parts. If so, the tractor could turnover.
Insert the hitch pin and snap pin correctly after
attaching / detaching equipment.
DO NOT exceed the maximum permissible vertical
and horizontal load as below.
Horizontal load : 3600kg (7937 lbs)
②
②②
② Drawbar
Vertical load : 350kg (Long position) (772 lbs)
450kg (Short position) (992 lbs)
Horizontal load : 2800kg (6173 lbs)
③
③③
③ Drawbar w/clevis
Vertical load : 350kg (Long position) (772lbs)
450kg (Short position) (992lbs)
Horizontal load : 2800kg (6173lbs)
Snap pin
Connecting
pin
Drawbar
Drawbar
w/clevis
Hitch pin
4
4 4
4 - 16
▶
Pulling from the tractor rear axle or any point above the axle may cause the tractor
to overturn. Use always the drawbar or hitch for pulling work.
▶
Do not tow equipment without brakes, weighing more than twice the tractor weight.
▶
When locking the hitch or drawbar with pin after aligning to the towing equipment,
apply the parking brake and stop the engine.
▶
Before transporting equipment on public roads, make sure you comply with your
local traffic regulation.
Caution
To Next Page
Loading...
Need help?
General
