LS tractor G3038 User Manual

HST type
HST typeHST type
HST type
Caution
▶ Check each part before starting
engine.
▶ Check if there is some other
people around before starting.
▶ Place all the levers and switches in
NEUTRAL or OFF position.
1. Sit in the driver’s seat
and apply the parking
brake lever.
2. Place the range gear
shift lever and HST
forward/reverse pedal in
NEUTRAL, and PTO
switch in OFF position.
3. Push the throttle
lever to the middle
position of the full
throttle.
4. Turn the key switch
to ON and check if
engine oil pressure
indicator, battery
charging indicator, cold
start aid indicator is ON.
5. Wait until cold start
Reverse pedal
Throttle lever
Forward pedal
Brake pedal
Differential
lock pedal
Range gear
shift lever
4
4 4
4 - 2
5. Wait until cold start
aid indicator is OFF.
(about 10~15 seconds)
6. Turn the key switch to
START position. As soon
as the engine starts,
release the key switch to
ON position.
7. Check if engine oil pressure
indicator and battery charging
indicator are OFF. If any
indicator is ON, stop the
engine immediately and check.
8. Run engine for a few
minutes to warm up the
engine oil and
transmission oil.
4WD lever
shift lever

LS tractor G3038 Specifications

General

Brand	LS tractor
Model	G3038
Category	Tractor
Language	English