Makita DUC254 User Manual

12 ENGLISH
SPECIFICATIONS
Model:
DUC204
DUC254
DUC254C
Overall length (without guide bar)
256 mm
Rated voltage
D.C. 18 V
Net weight
2.8 - 3.3 kg
Standard guide bar length
200 mm
250 mm
Recommended guide bar length
with 90PX
200 -
250 mm
-
with 91PX
-
250 mm
-
with 25AP
-
250 mm
Applicable saw chain type (refer
to the table below)
90PX
90PX
91PX
25AP
Standard sprocket
Number of teeth
6
9
Pitch
3/8″
1/4″
Chain speed
0 - 24 m/s
(0 - 1,440 m/min)
0 - 22.5 m/s
(0 - 1,350 m/min)
Chain oil tank volume
140 cm
3
• Due to our continuing program of research and development,
the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including
the battery cartridge. The lightest and heaviest combination,
according to EPTA-Procedure 01/2014, are shown in the
table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be
available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
Saw chain, guide bar, and sprocket combination
Saw ch
ain type
25AP
Number of drive links
60
Guide bar
Guide bar length
250 mm
Type
Sprocket nose bar
Sprocket
Number of teeth
6
Pitch
3/8″

Makita DUC254 Specifications

General

Idle speed	- RPM
Chain pitch	3/8 \
Chain speed	24 m/s
Blade length	- mm
Product color	Green
Safety switch	Yes
Chain bar length	250 mm
Oil tank capacity	0.14 L
Power source	Battery
Battery voltage	18 V
Battery included	No

Weight and Dimensions

Length	256 mm
Weight	2800 g