The Torque Boost
mode is not
available after replacing
the battery cartridge with a fully charged
one.
Depending on the usage conditions, the
Torque Boost mode is
not available
after replacing the
battery cartridge.
Use the tool in the normal mode until the
installed battery cartridge becomes empty,
and then replace the battery cartridge with
a fully charged one, or recharge the battery
cartridge.
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use
of any other
accessories or attachments might present
a risk of injury to persons. Only
use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service
Center.
• Saw chain
• Guide bar
• Guide bar cover
• Sprocket
• Spike bumper
• File
• Tool bag
• Makita genuine battery and
charger
WARNING: If you purchase a guide bar of
different length from the standard guide bar, also
purchase a suitable guide bar cover together. It
must fit and fully cover the guide bar on the chain
saw.
NOTE: Some items in the list may be included in the
tool package as standard
accessories. They may
differ from country to country.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
