14 ENGLISH
national laws, electric
equipment and batteries
and battery pack(s) that have reached the
end of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for
cutting branches and pruning
trees. It is also suitable for tree service.
) : 4.1 m/s
NOTE: The declared vibration emission
value has been
measured in accordance with the standard
test method and may be used for comparing one tool
with another.
NOTE: The declared vibration emission
value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission
during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of
conformity is included as
Annex A to this instruction
manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result
in electric shock, fire
and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in
the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Chain saw safety
warnings
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the
saw chain.
2. Always hold the chain saw with your right
hand on the top handle and your left hand on
the front handle. Holding the chain saw with a
reversed hand configuration
increases the risk of
personal injury and should
never be done.
3. Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains
contacting a "live" wire may
To Next Page
Loading...
Need help?
General
Weight and Dimensions
